uboot-phytec
Public
Source
committed 7b51b576d6d { 800, 600, 60, 25000, 40000, 88, 40, 23, 1, 128, 4, FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, FB_VMODE_NONINTERLACED},// SPDX-License-Identifier: GPL-2.0+/* * (C) Copyright 2004 * Pierre Aubert, Staubli Faverges , <p.aubert@staubli.com> * Copyright 2011 Freescale Semiconductor, Inc. *//************************************************************************ Get Parameters for the video mode: The default video mode can be defined in CONFIG_SYS_DEFAULT_VIDEO_MODE. If undefined, default video mode is set to 0x301 Parameters can be set via the variable "videomode" in the environment. 2 diferent ways are possible: "videomode=301" - 301 is a hexadecimal number describing the VESA mode. Following modes are implemented: Colors 640x480 800x600 1024x768 1152x864 1280x1024 --------+--------------------------------------------- 8 bits | 0x301 0x303 0x305 0x161 0x307 15 bits | 0x310 0x313 0x316 0x162 0x319 16 bits | 0x311 0x314 0x317 0x163 0x31A 24 bits | 0x312 0x315 0x318 ? 0x31B --------+--------------------------------------------- "videomode=bootargs" - the parameters are parsed from the bootargs. The format is "NAME:VALUE,NAME:VALUE" etc. Ex.: "bootargs=video=ctfb:x:800,y:600,depth:16,pclk:25000" Parameters not included in the list will be taken from the default mode, which is one of the following: mode:0 640x480x24 mode:1 800x600x16 mode:2 1024x768x8 mode:3 960x720x24 mode:4 1152x864x16 mode:5 1280x1024x8 if "mode" is not provided within the parameter list, mode:0 is assumed. Following parameters are supported: x xres = visible resolution horizontal y yres = visible resolution vertical pclk pixelclocks in pico sec le left_marging time from sync to picture in pixelclocks ri right_marging time from picture to sync in pixelclocks up upper_margin time from sync to picture lo lower_margin hs hsync_len length of horizontal sync vs vsync_len length of vertical sync sync see FB_SYNC_* vmode see FB_VMODE_* depth Color depth in bits per pixel All other parameters in the variable bootargs are ignored. It is also possible to set the parameters direct in the variable "videomode", or in another variable i.e. "myvideo" and setting the variable "videomode=myvideo"..****************************************************************************/