Commits
Ran Wang committed 2e2432559aa
LF-387-4 usb: dwc3: Add cache type configuration support
This feature is telling how to configure cache type on 4 different
transfer types: Data Read, Desc Read, Data Write and Desc write. For each
treasfer type, controller has a 4-bit register field to enable different
cache type. Quoted from DWC3 data book Table 6-5 Cache Type Bit Assignments:
----------------------------------------------------------------
MBUS_TYPE| bit[3] |bit[2] |bit[1] |bit[0]
----------------------------------------------------------------
AHB |Cacheable |Bufferable |Privilegge |Data
AXI3 |Write Allocate|Read Allocate|Cacheable |Bufferable
AXI4 |Allocate Other|Allocate |Modifiable |Bufferable
AXI4 |Other Allocate|Allocate |Modifiable |Bufferable
Native |Same as AXI |Same as AXI |Same as AXI|Same as AXI
----------------------------------------------------------------
Note: The AHB, AXI3, AXI4, and PCIe busses use different names for certain
signals, which have the same meaning:
Bufferable = Posted
Cacheable = Modifiable = Snoop (negation of No Snoop)
In most cases, driver support is not required unless the default values of
registers are not correct *and* DWC3 node has enabled dma-coherent. So far we
have observed USB device detect failure on some Layerscape platforms if this
programming was not applied.
Related struct:
struct dwc3_cache_type {
u8 transfer_type_datard;
u8 transfer_type_descrd;
u8 transfer_type_datawr;
u8 transfer_type_descwr;
};
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Reviewed-by: Jun Li <jun.li@nxp.com>