Commits
Greg Ungerer committed 9b483b889da
ARM: dts: imx6ull: add UART5 input select register definitions The iMX6ULL UART5_RX_DATA_SELECT_INPUT DAISY Register has some different bit definitions to that same register in the iMX6UL. The bits for the iMX6UL: 000 CSI_DATA00_ALT8 — Selecting Pad: CSI_DATA00 for Mode: ALT8 001 CSI_DATA01_ALT8 — Selecting Pad: CSI_DATA01 for Mode: ALT8 010 GPIO1_IO04_ALT8 — Selecting Pad: GPIO1_IO04 for Mode: ALT8 011 GPIO1_IO05_ALT8 — Selecting Pad: GPIO1_IO05 for Mode: ALT 100 UART5_TX_DATA_ALT0 — Selecting Pad: UART5_TX_DATA for Mode: ALT 101 UART5_RX_DATA_ALT0 — Selecting Pad: UART5_RX_DATA for Mode: ALT But for the iMX6ULL: 000 CSI_DATA00_ALT8 — Selecting Pad: CSI_DATA00 for Mode: ALT8 001 CSI_DATA01_ALT8 — Selecting Pad: CSI_DATA01 for Mode: ALT8 010 GPIO1_IO04_ALT8 — Selecting Pad: GPIO1_IO04 for Mode: ALT8 011 GPIO1_IO05_ALT8 — Selecting Pad: GPIO1_IO05 for Mode: ALT 100 UART1_TX_DATA_ALT9 — Selecting Pad: UART1_TX_DATA for Mode: ALT9 101 UART1_RX_DATA_ALT9 — Selecting Pad: UART1_RX_DATA for Mode: ALT9 110 UART5_TX_DATA_ALT0 — Selecting Pad: UART5_TX_DATA for Mode: ALT0 111 UART5_RX_DATA_ALT0 — Selecting Pad: UART5_RX_DATA for Mode: ALT0 Specifically for a board I am working on with the serial console on UART5 I need to be able to enable UART5_RX_DATA_ALT0 mode. There is no definition for the iMX6ULL version of that in imx6ul-pinfunc.h or imx6ull-pinfunc.h. Add definitions for the missing UART5 input select register bits of the iMX6ULL. Signed-off-by: Greg Ungerer <gerg@linux-m68k.org> Acked-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>