Commits
Dong Aisheng committed a7f2be94be9
mmc: sdhci-esdhc-imx: fix warning during module remove function Since the clock is managed by runtime pm currently, we do not need disable it again during driver remove function, or it will cause clock disable count mismatch issue since the clocks have already been disabled. The issue can be simply reproduced by unbind the devices via sysfs. mx6slevk:/sys/bus/platform/drivers/sdhci-esdhc-imx# echo 2194000.usdhc > unbind mmc1: card aaaa removed ------------[ cut here ]------------ WARNING: CPU: 0 PID: 657 at drivers/clk/clk.c:842 __clk_disable+0x68/0x88() Modules linked in: CPU: 0 PID: 657 Comm: sh Not tainted 3.13.0-rc1+ #285 Backtrace: [<80012160>] (dump_backtrace+0x0/0x10c) from [<80012438>] (show_stack+0x18/0x1c) r6:80481370 r5:00000000 r4:8088ecc8 r3:00000000 [<80012420>] (show_stack+0x0/0x1c) from [<80616b14>] (dump_stack+0x84/0x9c) [<80616a90>] (dump_stack+0x0/0x9c) from [<80027158>] (warn_slowpath_common+0x70/0x94) r5:00000009 r4:00000000 [<800270e8>] (warn_slowpath_common+0x0/0x94) from [<80027220>] (warn_slowpath_null+0x24/0x2c) r8:bec4ff78 r7:0000000e r6:bf91d800 r5:bf81d080 r4:bf81d080 [<800271fc>] (warn_slowpath_null+0x0/0x2c) from [<80481370>] (__clk_disable+0x68/0x88) [<80481308>] (__clk_disable+0x0/0x88) from [<8048148c>] (clk_disable+0x20/0x2c) r4:200f0113 r3:bf95ec00 [<8048146c>] (clk_disable+0x0/0x2c) from [<80463bd8>] (sdhci_esdhc_imx_remove+0x64/0xa4) r5:bf81d080 r4:bfabb010 [<80463b74>] (sdhci_esdhc_imx_remove+0x0/0xa4) from [<8032e82c>] (platform_drv_remove+0x20/0x24) r6:808ae0e0 r5:808ae0e0 r4:bf91d810 r3:80463b74 [<8032e80c>] (platform_drv_remove+0x0/0x24) from [<8032d010>] (__device_release_driver+0x78/0xd0) [<8032cf98>] (__device_release_driver+0x0/0xd0) from [<8032d090>] (device_release_driver+0x28/0x34) r5:bf91d810 r4:bf91d844 [<8032d068>] (device_release_driver+0x0/0x34) from [<8032c0c8>] (unbind_store+0x80/0xc4) r5:bf91d810 r4:80899ba0 [<8032c048>] (unbind_store+0x0/0xc4) from [<8032b648>] (drv_attr_store+0x28/0x34) r7:bed73100 r6:0000000e r5:00000000 r4:8032b620 [<8032b620>] (drv_attr_store+0x0/0x34) from [<80140580>] (sysfs_write_file+0x1b0/0x1e4) [<801403d0>] (sysfs_write_file+0x0/0x1e4) from [<800dcda0>] (vfs_write+0xb4/0x190) [<800dccec>] (vfs_write+0x0/0x190) from [<800dd3e4>] (SyS_write+0x44/0x80) r9:0000000e r8:00000000 r7:01a00408 r6:bf3b1c00 r5:00000000 r4:00000000 [<800dd3a0>] (SyS_write+0x0/0x80) from [<8000e900>] (ret_fast_syscall+0x0/0x48) r9:bec4e000 r8:8000eac4 r7:00000004 r6:76f5fb40 r5:01a00408 r4:0000000e ---[ end trace a0897d268e6233b2 ]--- If without runtime pm, we just run as before to match the clock enable in probe function. Signed-off-by: Dong Aisheng <b29396@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>