Commits
Dave Hansen committed 0f6ff2bce0d
x86/mm/mpx: Work around MPX erratum SKD046 This erratum essentially causes the CPU to forget which privilege level it is operating on (kernel vs. user) for the purposes of MPX. This erratum can only be triggered when a system is not using Supervisor Mode Execution Prevention (SMEP). Our workaround for the erratum is to ensure that MPX can only be used in cases where SMEP is present in the processor and is enabled. This erratum only affects Core processors. Atom is unaffected. But, there is no architectural way to determine Atom vs. Core. So, we just apply this workaround to all processors. It's possible that it will mistakenly disable MPX on some Atom processsors or future unaffected Core processors. There are currently no processors that have MPX and not SMEP. It would take something akin to a hypervisor masking SMEP out on an Atom processor for this to present itself on current hardware. More details can be found at: http://www.intel.com/content/dam/www/public/us/en/documents/specification-updates/desktop-6th-gen-core-family-spec-update.pdf " SKD046 Branch Instructions May Initialize MPX Bound Registers Incorrectly Problem: Depending on the current Intel MPX (Memory Protection Extensions) configuration, execution of certain branch instructions (near CALL, near RET, near JMP, and Jcc instructions) without a BND prefix (F2H) initialize the MPX bound registers. Due to this erratum, such a branch instruction that is executed both with CPL = 3 and with CPL < 3 may not use the correct MPX configuration register (BNDCFGU or BNDCFGS, respectively) for determining whether to initialize the bound registers; it may thus initialize the bound registers when it should not, or fail to initialize them when it should. Implication: A branch instruction that has executed both in user mode and in supervisor mode (from the same linear address) may cause a #BR (bound range fault) when it should not have or may not cause a #BR when it should have. Workaround An operating system can avoid this erratum by setting CR4.SMEP[bit 20] to enable supervisor-mode execution prevention (SMEP). When SMEP is enabled, no code can be executed both with CPL = 3 and with CPL < 3. " Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave@sr71.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20160512220400.3B35F1BC@viggo.jf.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>