Commits
Fabio Estevam committed a90e6053baa
ASoC: mxs-sgtl5000: Configure the dai_links as unidirectional On a mx28 board, running "aplay -l" and "arecord -l" results in the following: $ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: mxssgtl5000 [mxs_sgtl5000], device 0: Playback sgtl5000-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: mxssgtl5000 [mxs_sgtl5000], device 1: Capture sgtl5000-1 [] Subdevices: 1/1 Subdevice #0: subdevice #0 $ arecord -l **** List of CAPTURE Hardware Devices **** card 0: mxssgtl5000 [mxs_sgtl5000], device 0: Playback sgtl5000-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: mxssgtl5000 [mxs_sgtl5000], device 1: Capture sgtl5000-1 [] Subdevices: 1/1 Subdevice #0: subdevice #0 ,which is not correct because we got a capture device listed in aplay and a playback device listed in arecord. On mx28 there are two serial audio interface ports (SAIF0 and SAIF1) and each one of them are unidirectional. Allow to specify a dai link as 'playback_only' or 'capture_only', which suits well for this case. After this change we can correctly report the capabilities as follows: $ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: mxssgtl5000 [mxs_sgtl5000], device 0: HiFi Playback sgtl5000-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0 $ arecord -l **** List of CAPTURE Hardware Devices **** card 0: mxssgtl5000 [mxs_sgtl5000], device 1: HiFi Capture sgtl5000-1 [] Subdevices: 1/1 Subdevice #0: subdevice #0 Also tested playback and capture on the mx28evk board. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>