Commits
Suresh Siddha committed f1c6300183d
x86, apic: fix broken legacy interrupts in the logical apic mode Recent commit 332afa656e76458ee9cf0f0d123016a0658539e4 cleaned up a workaround that updates irq_cfg domain for legacy irq's that are handled by the IO-APIC. This was assuming that the recent changes in assign_irq_vector() were sufficient to remove the workaround. But this broke couple of AMD platforms. One of them seems to be sending interrupts to the offline cpu's, resulting in spurious "No irq handler for vector xx (irq -1)" messages when those cpu's come online. And the other platform seems to always send the interrupt to the last logical CPU (cpu-7). Recent changes had an unintended side effect of using only logical cpu-0 in the IO-APIC RTE (during boot for the legacy interrupts) and this broke the legacy interrupts not getting routed to the cpu-7 on the AMD platform, resulting in a boot hang. For now, reintroduce the removed workaround, (essentially not allowing the vector to change for legacy irq's when io-apic starts to handle the irq. Which also addressed the uninteded sife effect of just specifying cpu-0 in the IO-APIC RTE for those irq's during boot). Reported-and-tested-by: Robert Richter <robert.richter@amd.com> Reported-and-tested-by: Borislav Petkov <bp@amd64.org> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Link: http://lkml.kernel.org/r/1344453412.29170.5.camel@sbsiddha-desk.sc.intel.com Signed-off-by: H. Peter Anvin <hpa@zytor.com>