linux-phytec-ti

arm64: dts: ti: k3-j721e-main: Add ICSSG nodes

Add the DT nodes for the ICSSG0 and ICSSG1 processor subsystems that are
present on the K3 J721E SoCs. The two ICSSGs are identical to each other
for the most part, with the ICSSG1 supporting slightly enhanced features
for supporting SGMII PRU Ethernet. Each ICSSG instance is represented by
a pruss-soc-bus node and a child PRUSS subsystem node. These nodes are
enabled by default.

The ICSSGs on K3 J721E SoCs are revised versions of the ICSSG on the
AM65x SoCs. The PRU IRAMs are slightly smaller, and the IP includes
two new auxiliary PRU cores called Tx_PRUs. The Tx_PRUs have 6 KB of
IRAMs and leverage the same host interrupts as the regular PRU cores.

The ICSSG subsystem node contains the entire address space and the
various interrupts generated towards the main MPU. The various
sub-modules of the ICSSG are represented as individual child nodes (so
platform devices themselves) of the PRUSS subsystem node. These include
the two PRU cores, two RTU cores, two Tx_PRU cores and the interrupt
controller. The two Industrial Ethernet Peripheral (IEP) instances, the
Real Time Media Independent Interface controller (MII_RT), the Gigabit
capable MII_G_RT and the CFG sub-module are represented as syscon nodes.
All the Data RAMs are represented within a child node of its own named
'memories' without any compatible. The CFG sub-module provides two
internal clock muxes, and these are represented by the coreclk_mux and
iepclk_mux nodes.

The DT nodes use all standard properties. The regs property in the
PRU/RTU nodes define the addresses for the Instruction RAM, the Debug
and Control sub-modules for that PRU core. The firmware for each
PRU/RTU/Tx_PRU core is defined through a 'firmware-name' property.
The default clock sources for the IEP clocks are also defined using
the assigned-clock-parents property.

The default names for the firmware images for each PRU, RTU and Tx_PRU
cores are defined as follows (these can be adjusted either in derivative
board dts files or through sysfs at runtime if required):
  ICSSG0 PRU0 Core: j7-pru0_0-fw ; ICSSG0 RTU0 Core: j7-rtu0_0-fw
  ICSSG0 PRU1 Core: j7-pru0_1-fw ; ICSSG0 RTU1 Core: j7-rtu0_1-fw
  ICSSG1 PRU0 Core: j7-pru1_0-fw ; ICSSG1 RTU0 Core: j7-rtu1_0-fw
  ICSSG1 PRU1 Core: j7-pru1_1-fw ; ICSSG1 RTU1 Core: j7-rtu1_1-fw
  ICSSG0 Tx_PRU0 Core: j7-txpru0_0-fw ; ICSSG0 Tx_PRU1 Core: j7-txpru0_1-fw
  ICSSG1 Tx_PRU0 Core: j7-txpru1_0-fw ; ICSSG1 Tx_PRU1 Core: j7-txpru1_1-fw

Signed-off-by: Suman Anna <s-anna@ti.com>
Reviewed-by: Roger Quadros <rogerq@ti.com>