src: boards: src: add HDMI support for am572x_phycore_rdkThis patch adds support for HDMI on am572x_phycore_rdk boards.
This support was tested with the displayDss example project.
Internal reference: AM57TRTOS-20 AM57TRTOS-26
Signed-off-by: Matt McKee <mmckee@phytec.com>
BugFix: PDK-2814 Desc: Max number of semaphore in PDK not enough for AVB UC on TDA2Px - Increase to 1050
Resolution: Increased the number of Semaphores in static config
Signed-off-by: prasad konnur <prasadkonnur@ti.com>
[Bug Fix] PDK-2810PDK-2810: [VPS] VIP Capt Close does not unregister the overflow interrupt
Resolution:
- Unregister of VIP overflow interrupt is wrongly done
- Instead of using overflow handle it was using the VSYNC handle
- Updated test case to cover this scenario
- This was missed becasuse of test gap
Signed-off-by: Sivaraj R <sivaraj@ti.com>
PDK-2805: Added D3 changes for RVP boards- Added setup of additional FPD channels to the power up sequence
- Cleaned up bsp_boardTda2xxRvp
- Updated to support new revs of the TDA2xx RVP board IDs.
- Expanded the concept of LateInit() from TDA3 to TDA2 and moved
GPIO expander initialization to this function for TDA2 RVP.
Signed-off-by: Sivaraj R <sivaraj@ti.com>
PDK-2511 Adding support for APIs in the mmwavelinkAdded support for the following APIs:
rlDeviceSetMiscConfig
rlDeviceGetDataFmtConfig
rlDeviceGetDataPathConfig
rlDeviceGetDataPathClkConfig
rlDeviceGetCsi2Config
rlSetMultiChirpCfg
rlGetAdvFrameConfig
rlSetContModeConfig
rlEnableContMode
rlSetMultiBpmChirpConfig
Signed-off-by: Piyali Goswami <piyali_g@ti.com>
[PDK 2504][VPS]Missing D3 RVP board revision IDs from 'gBoardRevStr' in 'bsp_board.c'Issue:
D3 RVP board revision IDs were missing from 'gBoardRevStr' in 'bsp_board.c' as a result of this, application using this structure were crashing/failing
Solution:
Add respective board revision ID in the 'gBoardRevStr'
Signed-off-by: Dhande <v-dhande@ti.com>
[PDK-2393] Frame Width unaligned to 64 bits will be cropped to 64 bitsAdded the logic to do a ceiling of the width to make sure the whole line is recieved.
Pitch alignment should not be a problem as the data will be 32 bytes aligned.
Signed-off-by: Piyali Goswami <a0131625@ti.com>
[PDK-2387] Half frame issue with tda2ex 17x17 is fixed.Csi2 lane configuration of tda2ex 17x17 was over written by changes for
enabling two csi2 phy instance. Default mode of 17x17 was set to two lane
which was overwritten as 4 lane. Hence removing the overwriting.
Signed-off-by: Jithin Suresh <x0272999@ti.com>
